From Breece Cloud, it is possible to control the BreeceGo App from the group and/or installation level
here is how to find the configuration for BreeceGo
BreeceGo Menu
the Menu buttons to be used for BreeceGo
The Menu arrows are used to rearrange the Menu buttons in which order is preferred.
Accessible
Configure the accessibility of the menu buttons, Yes, No, or Super User only
- Yes
Botton will be shown on the app
-No
Botton will not be shown on the app
-Yes - Super user-only
button will be shown but need a password before accessing (setting for the below see general settings)
In-app - will look like this
General Settings
Configuration for all the settings in BreeceGo.
Language:
Choose between the supported languages
Hide Insight Widget :
Hides the Widget in the central part of the app screen which shows the displays overview and queue overview.
Overwrite PointMobile Scanwedge settings:
Point Mobile can handle one scanwegde setting and is used by another program, we want to use the setting for BreeceGo.
SuperUser Password:
This is where the password for the Menu Buttons (Yes - super-user only) is set.
Default Input Method
Here the default input method can be selected for ESL serial number barcodes and for product number barcodes.
Select between a Camera - Laser Scanner or Keyboard.
Display features
yes, BreeceGo will control the display when used.
No, the BreeceGo app will accept even faulty displays. They can afterward be found in Breece Cloud
Product Input Features
Remove leading string
If there is a leading string, an example could be 5 digits which are in front of every order number in the barcode
the system can remove those when scanned by BreeceGo.
Just enter the string here to save.
Keyboard Layout ( Product input)
Here the default Keyboard layout can be selected between Numeric and Standard ( Alfa)
Convert Code 39 to 32
this setting ( Often called the farmaceutical conversion, because of its use in Italian pharmacies) is used to convert a barcode 39 into a 32.
Camera Barcode Scanning
Press to scan
Makes sure you don't scan anything unintentionally.
When enabled the camera will only scan for barcodes when the user presses the button.
Confirm Camera input
When enabled each scan must be confirmed by the user
Lock the settings
There is a lock to the right of the setting.
If the lock is set, then the setting can not be overwritten locally on the device.
If the lock is open, then the user can overwrite the setting of the BreeceGo locally on the device.
Settings
In this sub-menu, it is possible to set the extra features on the device
Continuous scanning:
Keeps scanner on all the time
Code duplicate filter:
Time in ms before a rescan can be made - Please note that this setting will only apply while "Continuous scanning" is enabled.
Preferred resolution:
Set on auto and not be edit
Beep enabled:
Enable or disable the device to use a beep sound
Vibration enabled:
Enable or disable the device to use vibration
Barcode Symbology (Normally this is not changed):
In this sub-menu, it is possible to activate the barcode standards you wish to use on your system.
Barcode Symbology Properties:
Here the properties of some special Barcode handling can be made.
BreceGo Notification
From Breece Cloud, it is possible to set up BreeceGo Notification.
here is how to find it on the cloud
Notification Types
Here it is possible to enable or disable different notification types.
when enabled the other notifications will appear in the message part of the BreeceGo app.
They are marked with colors:
Red is an alert
Yellow is a warning
Green is OK
Alarm Configuration
When an alarm is enabled it has to be configured:
Notify when lowered
When checked, it determines to send a notification when the alarm is no more, either because it is resolved or inactive.
The Threshold
is the minimum time from an alarm that goes off until it reaches the BreeceGo app.
